HUAWEI eKitEngine AP271E Wireless Access Point

Huawei eKitEngine AP266 Wireless Access Point

0 Review(s) 
Huawei
AP266 BL

Wall plate AP | Wi-Fi 6 | 2.975 Gbps device rate | Dual-radio | 64 access users recommended | Max. 128 access users | 23 dBm transmit power | 4 x GE electrical ports | PoE | Smart antenna | leader AP | 20 m optimal coverage range

Out of Stock
QAR 419.00
Wi-Fi standard 2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11a/n/ac/ac Wave 2/ax
Installation Type Desk,Wall,Ceiling (Gypsum Board),Junction Box (86 mm/1-Gang 120 mm/Octagonal)
Optimal Signal Distance (m) 20
Max Number of Access Users 128
Recommended Number of Access Users 64
Device Rate 2.975 Gbps
Power supply mode PoE
Service port surge protection PoE ports: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B Non-PoE ports: Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
Maximum PoE output power [W] 15 W
Maximum number of physical ports on the entire device GE (RJ45) x 5, 10M/100M/1000M auto-sensing
Radio number 2
Maximum channel bandwidth [MHz] Radio 0 (2.4 GHz): 40 MHz Radio 1 (5 GHz): 160 MHz
Maximum transmit power 2.4G: 20 dBm/chain 23 dBm (combined power) 5G: 20 dBm/chain 23 dBm (combined power)
MIMO spatial streams Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2
Maximum power consumption [W] 9.4 W (excluding PoE out)
Input voltage range [V] PoE: 802.3at/af
Dimensions without packaging (H x W x D) [mm(in.)] 160 mm x 86 mm x 38 mm (6.30 in. x 3.39 in. x 1.50 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 187 mm x 108 mm x 68 mm (7.36 in. x 4.25 in. x 2.68 in.)
Weight without packaging [kg(lb)] 0.23 kg (0.51 lb)
Weight with packaging [kg(lb)] 0.42 kg (0.93 lb)
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum temperature of the device decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Radio interface Built-in smart antennas
Antenna gain 2.4G: 4 dBi/chain (peak value) 2 dBi (combined gain) 5G: 4 dBi/chain (peak value) 1 dBi (combined gain)
Operating frequency band 2.4GHz,5GHz
: AP266 BL
Out of Stock

Data sheet

Brand
Huawei

Reviews

No customer reviews for the moment.

Write your review

Huawei eKitEngine AP266 Wireless Access Point

Wall plate AP | Wi-Fi 6 | 2.975 Gbps device rate | Dual-radio | 64 access users recommended | Max. 128 access users | 23 dBm transmit power | 4 x GE electrical ports | PoE | Smart antenna | leader AP | 20 m optimal coverage range

Write your review

Related Products